Some VSF Work

First, the parrotmen hut. This could be any primitive hut, really. The base is a $1.00 miniature birdhouse I purchased at a local craft store (Michael's) in their bargain aisle. First I cut the rope loop off the top. Then I cut off the perch in the front and stained the whole thing with a dark walnut stain.

Finally, I used the earth-y looking underside of the pot-toppers I was telling you about in another posting to do the roof. Just make a cone shape by making a circle and then cutting out a quarter of it. Glue to the roof using some PVA (Elmer's) glue painted on pretty thickly. I used superglue to join the edges of the roofing material together. I think it looks like a peat or thatched roof of some sort.

All that is left to do on this one is the small porch/step I am using to replace the perch dowel.

This second piece is an older piece that is getting a facelift. It's gotten a touchup of my now-standard Martian sand, plus a few layers of the water effects stuff I have been using. Finally, I added a lot of reed bundles. These are about an inch tall, so very high reeds/grasses for 15mm, or tall grass for 25/28mm gaming.

Scum in the pond it is...

Okay, I am going to give it a shot, as urged by the poll...

Which, by the way, got a disappointing response level.

I'll let you know how it goes in a day or two.

Jungle and Martian Pools

I've been re-working an old piece of VSF (Victorian Science Fiction) terrain I made over a year ago. I was never really happy with it, but it looks much better now.

Essentially, it's a piece of thin plywood, on which I smeared a fair amount of wood putty, forming some slighty uneven terrain and a depression in the center, for the pool. Sprayed the whole thing in various reddish-browns, then hand painted the center in the blues you see.

Sorry about the blurry shot. Some days I just can't take a decent picture.

What I had to re-work most was the sand/flocking around the pool. Originally, the ground looked more like a hard baked but way too smooth mud plain, not the desert-like surface I envision on a dying Mars' surface. I also added about three additional thin layers of the water to the pond for greater depth. Finally, I had glued in the small cluster of holly berries as some sort of alien reed plant in fruit. I have some more work to do on it, like reed bundles at the edges and some sort of game trail leading to the edge of the pool (maybe scraping away the sand and going back to that mud pack look), but I am much happier with it so far.

The second piece here is one I mentioned a few weeks ago. Its going to use a pot-topper for the grass around the pool. I have a few shots showing how I built up the pool, then primed and painted the interior of the pool and the rest of the base.

So, you can see the progression through the process. I poured water (first layer) into it late yesterday evening, so I have to wait until tonight to add more. It will also get three or four layers of the water. I have even thought of painting in a little green on one of the middle layers, after it dries, to get a little of a scummy water effect. What do you think? I'll poll it, I suppose, since I like to keep polls up anyway. Let me know, and make comments on what you think I should do.

Rivers Project, Part 3

So, I have finally gotten around to pouring some of the realistic water effect stuff into some of the river sections.

The stuff is pretty easy to work with, you just use it in thin layers. As you can see, I used some modelling clay to block the ends of the pieces so the liquid would not simply run all over the place. Then I set it aside to dry for a day.

After 24 hours, I poured a second layer. Again, let it sit for 24 hours.

It was actually more like 3 days before I got back around to these sections. I scored the ends along the modelling clay with a craft knife. Always use a fresh sharp blade - I probably keep the guys at X-Acto in business. Sorry about the blurry picture.

Now all you have to do is flock the banks, which I am going to try to get to this afternoon. Which means you may finally get to see some finished pieces in the next week or so. Note that I highly recommend you finish all of your pours and let it dry all the way before even thinking about flocking. The reason is simple: little bits of flock always get trapped in the hardening water. It isn't the end of the world, but it looks better without.

I have some custom pieces I need to work on to finish the project, and of course all that flocking and sanding and such. I hope to have a decent shot or two of some finished pieces by the end of the week. Until then, check out some of my other projects that I am updating.

Rivers, Part 2

So, this is a basic multi-part "how I did it" for the rivers. I have a few pictures to go with, as well, though they are of different pieces.

Just to re-cap, I am using the styrene sheet rivers from a company called Precision Products [www.appliedimaginationinc.com]. The sheets are 16"square, 0.025" thick, with vacuum-formed terrain impressed into the sheets. The stream is about 1" (2.5 cm) across, with banks of about equal width.

Materials and tools: wood putty, styrene rivers, kitchen shears, hobby knife, 1/16" thick plywood, glue, felt, a few heavy books

1. Cut out the river piece. I cut mine all the way to the edge of the banks, but you could leave a small lip or flange of plastic around it. I used kitchen shears to cut them out.


2. Wash the piece in warm water with some dish detergent, just to make sure there's no mold release on it.


3. Mix the wood putty. I used to have Durham's, which I actually prefer, but the DAP brand stuff works as well. You want to mix water with the powder until it gets like a really thick milkshake consistency.


4. Fill the underside of the river piece with the wood putty and let it dry overnight.



5. Next day, trace the shape of the river out onto some thin plywood or MDF. I use 1/16 inch birch plywood (about 1.5mm), that is supposed to be for R/C airplanes or something.


6. Cut the shape out. A bandsaw with a fine-tooth blade would be perfect for this, but I don't have one, so I use my hand jigsaw (sometimes called a fret saw or jeweler's saw, I think). Sand the rough edges.


7. Glue the river piece to the base. I use Allene's Tacky Glue usually, but I have also used superglue (liquid, not gel) with good results.
   
8. Clamp or weight down the piece and leave two+ hours (PVA) or twenty-ish minutes (superglue). I have tried lots of ways to weigh it down, and I am still least happy with this step of the process. Best so far has been a layer of felt or something, then a few large heavy books on top. It still leaves a few gaps at the edges, though.


9. Spray with flat white paint. I tried black paint on one piece. It doesn't work for me. Let dry (duh!).

At this point, you should have a piece of nicely detailed river, with the hollows filled and attached to a base for a nice, weighty, durable piece of terrain.

Next post, I'll discuss painting and filling the stream with water effect.

Rivers Project

[Carried over from my defunct Napoleonics blog]

[Originally posted Saturday, September 27, 2008]

I started a new terrain project last night, one that has been sitting in the Closet for more than a year. I bought some styrene sheets last year at Historicon from a company called Precision Products [www.appliedimaginationinc.com]. These sheets are 16"square, 0.025" thick, with vacuum-formed terrain impressed into the sheets. The two sheets I bought are 1" Straight Rivers [SKU 16091] and 1" River bends [SKU 16092]. The Straight Rivers has four lengths of straight river, each approximately 15" in length. The River Bends includes:

2 x 45 degree bends
2 x 90 degree bends
3 x Y-Junctions, and
1 x Wooden Bridge

I have cut out two pieces so far, the bridge and one 90 degree bend. Yesterday I filled the styrene hollows with DAP Water Putty to prevent it from crushing or flexing, and then glued each piece to a 1/16" plywood base. Late last night I primed the two pieces with flat white spray paint, the cheap stuff from WalMart. Today, I applied basecoat colors, using cheap craft paints. Sorry about the blurry picture, I was hurrying.

So far, I am pretty pleased with the results. The water putty has added some heft and rigidity, as has the plywood base. It is taking the paint really well, too.

I will be adding a link to all the photos to the margin tonight. I'll post more when I make some more progress.

Still to come:
Drybrushing for detail
Add flock and ballast
Pour scenic water into riverbanks
Build a hand rail. The only drawback is that the piece will lose its scale-neutrality if I do that.